oak table
overview
I chainsaw-milled some slabs from a tree which died in my yard, of lightning strike. Now I’m making a table of some kind from them. Purpose of table? TBD. Design? TBD. This is a placeholder doc as things progress.
timeline
July 2025
Got the slabs to the mill.
20 August 2025
Kiln drying complete.
25 August 2025
Visit mill for measurements (to develop CAD plan for CNC and glue-up)
process
- Slabs were cut and stacked on aluminum staves to allow air space. They were dried outdoors under cover for two years. I’m in the mid-Atlantic, so ambient humidity is very high on average
- Slabs were transported 07-2025 to Shenandoah Planing Mill, which will dry them in a vacuum kiln
- After drying, slabs will be planed flat on all sides and to common maximum thickness. These dimensions of the final slabs will be used to design the table size
- Slabs will be cut to size and joined into a table surface
- A slot will be CNC machined in the bottom of the slabs to accept a c-channel to provide stability
- Tabletop will be sanded and finished as appropriate
- Tabletop will be mounted to an Eames Modular Table Base
home | about | github | mastodon
built
epoch
1755875011
epoch
1755875011